
Ubiquiti QSFP28 DAC 100Gbps 0.5m Cable
SKU: UACC-DAC-QSFP28-0.5M
US$42.54
(excl.VAT)Guaranteed Safe Checkout
![]()
Ships in 48h
Ships from Ireland & LatviaNo customs in the EU
Tracked deliveryTo all 27 EU countries
Warranty & supportAfter-sales help
Card, bank, cryptoSecure checkout
Specifications: Ubiquiti QSFP28 DAC 100Gbps 0.5m Cable
ModelUACC-DAC-QSFP28-0.5M
Warranty12 months return-to-base service
Description for: Ubiquiti QSFP28 DAC 100Gbps 0.5m Cable
Explore Components and Cables
Ubiquiti · UACC-DAC-QSFP28-0.5M
Ubiquiti QSFP28 DAC 100Gbps 0.5m Cable
A 0.5 m QSFP28 copper DAC for very short connections between supported 100G rack ports. This Ubiquiti cable is intended for a QSFP28 link, with 100/40 Gbps family support where both endpoints allow it. It is not a faster substitute for an SFP28 cable.
Exact specifications
| Manufacturer part number | UACC-DAC-QSFP28-0.5M |
|---|---|
| GTIN-13 / barcode | 0810084690031 |
| Exact length | 0.5 m |
| Connector pair | QSFP28 to QSFP28 |
| Manufacturer link rates | 100 / 40 Gbps; endpoint dependent |
| Cable construction | Copper direct attach |
| Jacket | Black PVC |
| 0.5 m jacket diameter | 7.0 mm |
| Minimum bend radius | 37 mm for the 0.5 m variant |
| Operating temperature | 0 to 70 °C |
| Pack quantity | One cable, not a 10-pack |
| Warranty / service | 12 months return-to-base service; see conditions below. |
Use cases and applications
Use it for closely spaced equipment where the short 0.5 m routing length is sufficient and supported QSFP28 ports are available at both ends. Connector reach, strain relief and removal-tab access matter as much as the nominal cable length. No network-latency or application-throughput measurement is promised.
Compatibility and important limits
- Confirm QSFP28 DAC support, link mode and cable coding with both device manufacturers.
- Allow at least the specified 37 mm bend radius; a 0.5 m cable may be too short for routed or distant rack equipment.
- The SFP28 adapters in this range cannot accept this QSFP28 cable directly. No breakout function or included adapter is claimed.
Packaging and included items
One UACC-DAC-QSFP28-0.5M cable. The manufacturer also sells pack variants, but this listing is the single 0.5 m item, not a 10-pack. Switches and connector adapters are separate.
Image note: The manufacturer photo illustrates the QSFP28 cable family. The ordered item is the single 0.5 m UACC-DAC-QSFP28-0.5M; the family photo is not exact-length or multipack proof.
Optional accessories and alternatives
Accessories and alternatives are optional, not a required bundle. Check exact connectors, platform fit and supported media before combining products. Browse Cables for the wider range.
Packaging measurements
Estimated shipping package for quotation planning: 22 × 22 × 6 cm. Catalogue gross unit weight: 0.15 kg; this is not the bare-product mass. Package dimensions are a planning estimate, not a measured manufacturer specification. Confirm the final packed parcel before dispatch.
Dispatch and warranty
Dispatch within 48 hours. Dispatch and destination delivery are separate; stock is not reserved by viewing this page.
Warranty and service: 12-month return-to-base service. Ubiquiti’s separate limited manufacturer warranty for reseller-channel products is measured from its shipment to the authorised channel, not automatically from your Mineshop purchase date. Its two-year direct-webstore warranty does not apply simply because this cable is purchased online. Contact Mineshop to check the supplied unit’s entitlement.
How to start a claim: Contact Mineshop support with your order number, product serial number where present, a fault description and useful diagnostic photos. Wait for return authorisation and packing instructions before sending the product.
Commercial warranty and service terms do not limit your statutory rights against the seller. Physical damage, installation errors and use outside the manufacturer’s specifications are assessed under the applicable terms; no repair turnaround or advance replacement is promised.
Frequently asked questions
Is this one cable or a 10-pack?
This listing is the single-unit UACC-DAC-QSFP28-0.5M. Do not confuse it with a separately identified multipack.
Will it work with an SFP28 network adapter?
Not directly. QSFP28 and SFP28 are different connector form factors. The 25G SFP28 adapters in this range do not accept this cable.
Can the cable operate at 40G?
Ubiquiti lists 100 and 40 Gbps for the family. Both endpoints, firmware and negotiated link mode must support the chosen rate.
Does it split a 100G port into four 25G ports?
No breakout assembly is listed. This is a QSFP28-to-QSFP28 direct-attach cable, not a QSFP28-to-four-SFP28 cable.
What installation clearance is needed?
The 0.5 m variant has a 37 mm minimum bend radius. Check the connector bodies, routing and strain-relief space before ordering.
When is dispatch expected?
Dispatch within 48 hours. This is a dispatch estimate, not the arrival time. Delivery transit depends on destination and service.
Manufacturer documentation and build planning
Ubiquiti 100G DAC technical specifications · PC configuration planning
Manufacturer references explain specifications and integration requirements. Planning tools do not certify a complete build, and supported capabilities are not measured performance results.
Warranty
Terms of Sale
Shipping Information