A step up from 850 W for an AM5 workstation built around one current graphics card. GIGABYTE recommends an 850 W system PSU for the RTX 5080 Windforce OC SFF and 750 W for the RTX 5070 Ti Windforce OC SFF in our range, so a 1000 W unit leaves extra headroom for more drives, expansion cards and later upgrades. Add up your complete build before deciding.

One GIGABYTE UD1000GM PG5 V2 power supply (GP-UD1000GM PG5 V2) with its fully modular cable set: one 20+4-pin ATX cable, one CPU/EPS cable with two 4+4-pin connectors, two PCIe cables with two 6+2-pin connectors each, one native 12V-2x6 (12+4-pin) graphics cable, two SATA cables with four connectors each, and one peripheral cable with three 4-pin Molex connectors and one floppy connector.

Is this the ATX 3.1 version?

Yes. GIGABYTE specifies the UD1000GM PG5 V2 (GP-UD1000GM PG5 V2) as Intel ATX 12V v3.1 and PCIe Gen 5.1 ready. The earlier UD1000GM PG5 (Rev. 1.0 and Rev. 2.0) is an ATX 3.0 model, so look for “V2” in the model name.

Does it have a native cable for RTX 5080 and RTX 5070 Ti cards?

Yes. One native 12V-2x6 (16-pin) cable delivers up to 600 W. The Dual RTX 5060 Ti uses an 8-pin input, which the PCIe 6+2-pin connectors cover.

Can I run two graphics cards from it?

It has one 12V-2x6 cable and four PCIe 6+2-pin connectors on two cables. The GPU makers’ recommendations quoted above are for single-card systems, so calculate the full load of a two-GPU build before choosing a power supply.

Can I use it in a mining rig?

GIGABYTE designs this unit for desktop PCs and states that use for blockchain computing or mining voids its warranty.

Can I reuse modular cables from another power supply?

No. Modular cable pinouts differ between manufacturers and series; use only the cables supplied with this unit.

GIGABYTE UD1000GM PG5 V2 1000W ATX 3.1 PSU

Shop
Barošanas bloks
AI darbstacija
GIGABYTE UD1000GM PG5 V2 1000W – ATX 3.1 80 PLUS Gold Modular PSU