MikroTik CRS304-4XG-IN bezventilatora 4 portu 10GbE komutators
SKU: CRS304-4XG-IN
154,87 €
(bez PVN)Garantēti droša norēķinu procedūra
Nosūtām 24 h laikā
Nosūtīšana no Īrijas un LatvijasBez muitas ES
Izsekojama piegādeUz visām 27 ES valstīm
Garantija un atbalstsPēcpārdošanas palīdzība
Karte, banka, kriptoDroša apmaksa
Specifikācijas: MikroTik CRS304-4XG-IN bezventilatora 4 portu 10GbE komutators
ModelisCRS304-4XG-IN
Garantija12-month commercial warranty; seller claim route and applicable terms apply
Apraksts par: MikroTik CRS304-4XG-IN bezventilatora 4 portu 10GbE komutators
FAST COPPER LINKS. NO FAN NOISE.
A compact 10GbE meeting point for your workstation and storage
Connect a workstation, NAS and nearby systems through four multi-gigabit RJ45 ports without buying SFP transceivers. Browse our AI workstation range and components to plan the endpoints as well as the network. CRS304-4XG-IN is a standalone managed Ethernet switch, not a Wi-Fi router, network adapter or complete server.
Where this product makes sense
Workstation-to-NAS transfers
Four RJ45 ports negotiate 1, 2.5, 5 or 10GbE according to the attached devices and cabling. A slow endpoint, disk array or negotiated link remains the bottleneck.
A quieter desk or homelab
The enclosure acts as a heatsink and uses passive cooling. Keep ventilation clear: fanless does not mean heat-free or suitable for a sealed unventilated cabinet.
Flexible management and mounting
RouterOS v7 and SwOS dual-boot support provide switch-management options. Included DIN fastening hardware and screw-mount points support practical placement; an operating-system licence is already included.
Compatibility and limits
- Use Ethernet adapters that support the intended negotiated link speed. Existing 1GbE or 2.5GbE motherboard ports do not become 10GbE simply by connecting to this switch.
- Use correctly rated copper cabling and respect cable-length/quality limits for the target link speed. Validate the negotiated rate and error counters in the actual installation.
- The extra 10/100/1000 port is a separate Gigabit management connection, not a fifth 10GbE port. No SFP/QSFP sockets or transceivers are needed for the four copper data ports.
- PoE is an input power option: 802.3af/at PoE-in at 36–57V. This model does not provide PoE-out to cameras, access points or other powered devices.
- Two DC jacks and the 2-pin terminal accept 12–57V. The device selects the highest-voltage active input. Confirm polarity, voltage and supply capacity before using alternative power sources.
- VLANs and supported hardware offload features require correct configuration and firmware. Hardware switching throughput is not a promise of line-rate firewall, VPN, NAT or arbitrary routed processing.
Specifications
| Brand | MikroTik |
|---|---|
| Exact manufacturer part number | CRS304-4XG-IN |
| EAN / GTIN-13 | 4752224008954 |
| Copper data ports | 4 × RJ45; 1 / 2.5 / 5 / 10GbE |
| Management port | 1 × 10/100/1000 Ethernet |
| Switch chip / processor | Marvell 98DX2528; dual-core ARM64; 1200MHz |
| Memory / storage | 512MB RAM / 32MB flash |
| Operating system | RouterOS v7; SwOS dual-boot support; RouterOS licence level 5 |
| Power inputs | 2 DC jacks, 2-pin terminal and PoE-in |
| DC voltage | 12–57V for DC jacks and 2-pin terminal |
| PoE-in | IEEE 802.3af/at; 36–57V |
| PoE-out | Not provided |
| Power consumption | Up to 21W; up to 15W without attachments |
| Cooling / protection | Passive fanless cooling; IP20 indoor enclosure |
| Physical size | 176 × 128 × 35mm device; not dispatch parcel |
| Mounting | DIN fastening set; screw attachment points |
| Tested ambient range | −40°C to 70°C, manufacturer test specification |
What is included
One CRS304-4XG-IN switch; 48V 0.95A power adapter; DIN fastening set. The installed operating system and RouterOS licence are included.
Not included: Ethernet patch cables, 10GbE adapters, PoE injector/PSE, NAS and workstation are not included. Do not infer a regional mains-plug variant from a generic adapter photograph.
Delivery and warranty
Dispatch within 24 hours. This is dispatch timing, not an arrival guarantee. Availability is not a reservation. Transit time depends on the destination.
The commercial product warranty term is 12 months, subject to applicable terms and eligibility. Keep proof of purchase and the serial number, and contact Mineshop for troubleshooting and claim intake. Claims for this device go through the seller, not MikroTik directly; no longer direct-manufacturer term or guaranteed replacement speed is promised. Statutory rights are unaffected.
Six useful answers before ordering
Do I need SFP modules for the 10GbE ports?
No. All four high-speed data ports are copper RJ45 ports. Connect suitable Ethernet cabling directly to compatible adapters.
Does it power cameras or access points with PoE?
No. PoE-in powers the switch itself. There is no PoE-out function for downstream devices.
Are there five 10GbE ports?
No. There are four 1/2.5/5/10GbE data ports and one separate 10/100/1000 management port.
Will it make a 2.5GbE motherboard faster?
The motherboard link stays limited by its adapter. For a 10GbE workstation connection, install a suitable 10GbE adapter and use appropriate cabling.
Can it replace a high-throughput VPN or firewall router?
It is primarily a switch. RouterOS supports additional networking functions, but hardware switching rates do not establish firewall, VPN or software-routing performance.
What is included, and which warranty route do I use?
The switch, 48V 0.95A adapter, DIN fastening set and installed OS licence are included. The commercial term is 12 months under applicable terms; contact Mineshop for troubleshooting and claim intake with your receipt and serial number.
Official reference: Exact MikroTik CRS304-4XG-IN specification · MikroTik warranty claim guidance
Garantija
Pārdošanas nosacījumi
Piegādes informācija