HOME MINING · SCRYPT · DOGE & LTC · OPEN-SOURCE
Nexus L1 Dogecoin & Litecoin Miner
330 MH/s · 70W · 4× BM1491 · WiFi + Ethernet · AxeOS · Solo & Pool
The Nexus L1 is a compact, efficient Scrypt ASIC miner purpose-built for Dogecoin (DOGE) and Litecoin (LTC) mining at home. Powered by 4× BM1491 ASIC chips — the same silicon from Bitmain's Antminer L9 series — it delivers a stable 330 MH/s hashrate while consuming just 70W, achieving an exceptional efficiency of ~0.21 J/MH.
With both WiFi and Ethernet connectivity, the open-source AxeOS firmware, a built-in display, and quiet ~50 dB operation, the Nexus L1 offers an exceptional entry point for home-based Scrypt mining — without the noise, heat, or power demands of industrial hardware. Dual fan headers, automotive-grade fuse protection, and a desktop-friendly form factor make it the most refined home Scrypt miner available.
4× BM1491 Scrypt ASIC
Bitmain's high-efficiency Scrypt chips from the Antminer L9 series. Four chips deliver 330 MH/s of stable Scrypt hashpower at ~0.21 J/MH — industry-leading efficiency for home miners.
WiFi + Ethernet
2.4GHz WiFi for wireless convenience or Ethernet (RJ45) for rock-solid wired stability. Choose what fits your setup — both deliver reliable, low-latency mining 24/7.
⊕
Solo & Pool Mining
Solo mine Dogecoin for a chance at the full 10,000 DOGE block reward, or join any Scrypt pool for steady daily payouts. Switch freely via the AxeOS web interface.
⚙
Open-Source AxeOS
Fully open-source firmware with browser-based configuration. Plug-and-play setup takes under 10 minutes. Community-driven development with ongoing improvements.
Built-In Protection
Automotive-grade fuse protection safeguards against power surges and electrical faults. Dual fan headers let you add a second fan for improved airflow if desired.
Quiet ~50 dB Operation
Significantly quieter than industrial Scrypt miners (75+ dB). Well-suited for home offices, bedrooms, and shared living spaces with minimal disruption.
Dogecoin (DOGE) Litecoin (LTC) Bells (BEL) DigiByte (DGB) PepeCoin Luckycoin + all Scrypt coins
Solo mining Dogecoin gives you a chance at the full 10,000 DOGE block reward with every block attempt. At 330 MH/s, the Nexus L1 provides meaningful solo lottery odds — significantly better than single-chip Scrypt miners — while consuming just 70W. Think of it as the most efficient, lowest-cost crypto lottery ticket available — and you keep the rig after every draw.
| Model |
Nexus L1 |
| Algorithm |
Scrypt |
| ASIC Chips |
4 × BM1491 |
| Hashrate |
330 MH/s |
| Power Consumption |
~70W |
| Efficiency |
~0.21 J/MH |
| Connectivity |
2.4GHz WiFi + Ethernet (RJ45) |
| Display |
Built-in status screen |
| Firmware |
AxeOS (open-source) |
| Cooling |
Fan cooling (dual fan headers) |
| Noise Level |
~50 dB |
| Protection |
Automotive-grade fuse |
| Power Supply |
External PSU (included) |
| Form Factor |
Compact desktop |
| Mineable Coins |
DOGE, LTC, BEL + all Scrypt |
1× Nexus L1 Scrypt Miner (assembled & tested)
1× Power Supply Adapter + AC Cable
1× Quick-Start Guide
Frequently Asked Questions
Can the Nexus L1 mine Bitcoin?
No. The Nexus L1 uses the Scrypt algorithm, which is different from Bitcoin's SHA-256. It is optimized specifically for Dogecoin (DOGE), Litecoin (LTC), Bells (BEL), and other Scrypt-based coins. For Bitcoin mining, look at SHA-256 miners like the Bitaxe Gamma or NerdQaxe++.
How do I set it up?
Setup is plug-and-play and takes under 10 minutes. Connect the PSU, power on, and connect to the device's WiFi network (SSID: Bitaxe_XXXX) from your phone or laptop. Enter your home WiFi credentials through the AxeOS interface, note the IP address displayed on the built-in screen, then configure your mining pool and wallet address via the browser dashboard. Alternatively, connect via Ethernet for instant wired stability.
How much electricity does it consume?
The Nexus L1 draws approximately 70W — about the same as a single incandescent light bulb. At $0.20/kWh, monthly electricity costs are approximately $10. The efficiency of ~0.21 J/MH makes it one of the most power-efficient home Scrypt miners on the market.
How does the Nexus L1 compare to the Hammer DC 04?
The Hammer DC 04 delivers 210 MH/s at 80W with an AMOLED display and built-in profit switch. The Nexus L1 delivers 330 MH/s at 70W — roughly 57% more hashrate at lower power consumption, with better efficiency (0.21 vs 0.38 J/MH). The Nexus L1 also offers both WiFi and Ethernet connectivity, AxeOS open-source firmware, and dual fan headers. It's the superior choice for raw Scrypt mining performance per watt.
Can I add a second fan?
Yes. The Nexus L1 includes dual fan headers, allowing you to run a second fan for improved airflow. The single-fan configuration is sufficient for most environments, but adding a second fan can reduce temperatures further in warmer rooms or during extended 24/7 operation. The flexibility is built into the hardware — no modification needed.
Ships worldwide. Typical delivery 5–8 business days via DHL, UPS, or FedEx.
US USA CA Canada EU EU GB UK AU Australia Asia-Pacific Middle East & Africa Latin America
6-month
manufacturer warranty. All devices assembled, tested, and verified before shipping.